Autocue K8055 - Manual (Page 3)

 Autocue Group Ltd 2006
USB
Items needed to use KDriver Multi-user Interface device:
1 KDriver USB to IMT Converter Box (K8055 (USB))
1 Power Supply +15 - +30 VDC
1 Straight Through Serial Cable. (Male 9 Way D to Female 9 Way D)
1 USB Cable
Note: This box cannot be used in conjunction with Hybrid Multibutton, IMT Foot or
IMT 2 button controllers.
To connect a K8055 (USB) box to a Prompter PC
Connect the USB cable from the USB port on the K8055 box to the USB port on the
Prompter PC.
Connect the straight through serial cable from the Male 9 way D on the K8055 box to
the external port on the IMT card (Female 9 way D), The IMT card may be inside the
Prompter PC or in a Rack mounted box.
Plug the supplied power adaptor into the K8055 box. You should see the green LED
on the left hand side of the box light up and the red LED on the right hand side flash
once.