B&D Mfg Purge Cart User Manual
Power-flow purge cart, Operation manual, 2 horse power motor
POWER-FLOW PURGE CART
NOTE: Read the entire instruction manual before starting the installation.
WARRANTY
The Power-Flow Purge Cart is warranted for one year from date of sale. Alleged defective product must be returned
to B&D Mfg., Inc., 901 9th Street, Scranton, Iowa 51462, for inspection via prepaid freight. Defective parts will be
repaired or replaced at the manufacturer’s discretion. No allowance for labor or property damage is implied.
Warranty of performance is limited to the table provided with the unit.
INTRODUCTION
These instructions cover the use of the B&D Power-Flow Purge Cart Part No. GT-304SS-1.5 and GT-304SS-2. The
Power-Flow Purge Cart is designed for flushing out air and debris in the loop field. It can also be used to introduce
glycol into the system. The package contains a water holding tank, cart with solid foam tires, hose with camlock
connections and a lift out filter screen for easy removal of debris.
SAFETY PRECAUTIONS
*Electrical Supply to flush cart must be a single 20 amp, 120 volt circuit. If using extension cord, do not exceed
manufacturer’s rating for cord.
*Servicing of closed loop systems should be performed only by trained and qualified service personnel. Proper
precautions should be taken to minimize risk of electrical shock when using a flush cart. Wear proper safety glasses
and work gloves.
*When transporting the cart, be sure to keep cart in an upright position and secured to avoid any damage to the
flush cart.
*Be sure to drain the tank after each use to prevent damage to the rubber seals of the pump. It is best to store the
flush cart in an area free of freezing temperatures.
*Must Read and Follow Anti-freeze Manufacturer’s Recommendations and Procedures for adding anti-
freeze solution to the system.
B&D Mfg, Inc
901 9th Street
Scranton, IA 51462
Phone (712) 652-3424
Fax (712) 652-3388
www.bdmfginc.com
Patent No. 5,244,037
1
OPERATION MANUAL
20
24
28
32
36
40
44
48
52
56
60
64
68
72
76
80
84
88
92
0
10
20
30
40
50
60
70
80
90
100
110
120
130 (US)
gpm
FT. HEAD
2 Horse Power Motor
20
24
28
32
36
40
44
48
52
56
60
64
68
72
76
80
84
0
10
20
30
40
50
60
70
80
90
100
110
(US)
gpm
FT. HEAD
1‐1/2 Horse Power Motor