Balboa Water Group Dolphin II Spa Only CE - Manual (Page 6)

6
SPA ADDRESSING
Your CE-compliant spa does not
support addressing.
However, in case addressing is ever enabled by
accident, follow the steps below to disable.
1. Press the SPA button on the Dolphin once
2. Press and hold SETUP until the LED blinks
once. It will then blink twice.
3. Press the B button on the Dolphin 4 times in a
row (BBBB).
4. If the code is entered correctly, the LED will
blink twice. Dolphin should now function
properly.
5. If your Dolphin remote is still not operating
correctly, check your spa manual to see if this
feature is available on your system.
If so, follow the procedure described in your
spa manual to enter a spa address
of 0 (no address) into your spa.