Bissell 2880 - Manual (Page 6)

6
How To Use Your Perfect Sweep TURBO
The Perfect Sweep TURBO is a quick and easy way to clean your
bare floors and carpet.
Tip back the Handle into typical use position and gently tap the
Power Switch on the sweeper with your foot.
Note: The unit will not turn on if the Dirt Cup is
not secure.
To clean small areas, detach the Handle by depressing the
Handle Clip button where the bottom of the Handle slides
into the Perfect Sweep TURBO and pull the entire Handle
Assembly out. Use the Perfect Sweep TURBO by holding
the built-in hand grip.
When done, replace the Handle (if detached) and store for the
next use.
The Dirt Cup should be emptied after each use.
Make sure that the Perfect Sweep TURBO is in the “OFF”
position.
With the sweeper facing toward you, lift the Dirt Cup out.
Carry the Dirt Cup to a waste container and empty.
Replace the Dirt Cup by gently pressing it into the foot of the
sweeper. Make sure that it fits securely.
Clean exterior surfaces with a soft cloth dampened with water only.
Do not use a strong detergent or other cleaner - this may damage
the finish. Always unplug the Perfect Sweep TURBO from the
electrical outlet before cleaning the surface.
1.
2.
3.
Maintenance
WARNING:
Perfect Sweep TURBO will not
pick up crayons, marbles, and
other large or hard objects.
1.
2.
3.
4.
5.
ug603-1314_2880_305.indd 6 ug603-1314_2880_305.indd 6 8/19/05 2:30:41 PM 8/19/05 2:30:41 PM