Bang & Olufsen Adaptive Sound Technology - User Guide - Manual (Page 5)

Set up the speakers
Set the speaker types and the distances from
Points A and B to each speaker, to the left
and right side of the television screen and a
projector screen, to a viewing position and
the distance between the two points.
Set speaker type and distance …
> Bring up the TV SETUP menu and select
OPTIONS.
> Bring up the SOUND menu and select SPEAKER
SETUP.
> Select the speaker types.
> Press the
centre button on your remote control
to store the settings and bring up the DISTANCE
TO POINT A menu.
> Enter the required horizontal distances in
metres. The distance to a stereo speaker should
be measured to the left and right edges of the
speaker.
> Press the centre button on your remote control
to store the settings and bring up the DISTANCE
TO POINT B menu.
> Enter the horizontal distances.
> Press the
centre button on your remote control
to store the setting. The television can now
calculate your speaker setup.
Select the viewing position from where you watch
television.
When you set the speaker type, the speaker name
highlighted in the menu should match the speaker
producing a sound. In the menu that follows, you
are asked to enter the horizontal distance in
metres from Point A to each of your speakers, to
the left and right edge of your television screen
and a connected projector screen, to a viewing
position and to Point B.
A
B
DISTANCE TO POINT A
store
BEOLAB 7-2 LEFT 1.0 M
BEOLAB 7-2 RIGHT 1.0 M
BEOLAB 5 1.0 M
BEOLAB 5 1.0 M
BEOLAB 9 1.0 M
BEOLAB 9 1.0 M
BEOLAB 4000 1.0 M
BEOLAB 4000 1.0 M
BEOLAB 4000 1.0 M
BEOLAB 4000 1.0 M
BEOLAB 4000 1.0 M
TV LEFT 1.0 M
TV RIGHT 1.0 M
VIEW POSITION 1.0 M
CINEMA LEFT 1.0 M
CINEMA RIGHT 1.0 M
POINT B 1.0 M
SPEAKER TYPE
select
CENTRE 1 BEOLAB 7-2
CONFIG
SPEAKERS:
BEOLAB 5
BEOLAB 5
BEOLAB 9
BEOLAB 9
BEOLAB 4000
BEOLAB 4000
BEOLAB 4000
BEOLAB 4000
BEOLAB 4000
NONE
NONE
NONE
NONE
5