Register additional video equipment, What is connected – Bang & Olufsen BeoVision 4-37/44 - User Guide User Manual

Page 32

Advertising
background image

If you connect additional video

sources or equipment to BeoSystem 2,

you must register the equipment in

the Connections menu.

The settings you select in the

Connections menu tell BeoSystem 2

what is connected.

For information about where and

how to connect extra equipment,

refer to the chapters ‘Connect

additional equipment’ on page 18 in

the Reference book as well as ‘Socket

panels’ on page 9 in the Reference

book.

When your additional video

equipment has been connected and

registered in the Connections menu,

as described, you can operate it with

the Beo4 remote control.

Register additional video equipment

Equipment you can connect to each socket

V.Mem

V.Mem… for a Bang & Olufsen video recorder

DVD… for a DVD player

STB (DTV), STB (V.AUX)… for a set-top box*

None… if nothing is connected

AV

DVD… for a DVD player

DVD (YPbr)… for a DVD player connected to the

VGA-IN socket.

STB (DTV), STB (V.AUX)… for a set-top box*

V.AUX… for other equipment

Non B&O V.TP2… for a non-Bang & Olufsen

video recorder

DVD2… for a second DVD player or video

recorder

DVD2 (YPbr)… for a second DVD player or video

recorder connected to the VGA-IN socket.

S-VHS V.TP2… for a Super-VHS video tape

recorder

Decoder(2)… for a second decoder – Connect

your primary decoder to the DECODER socket

None… if nothing is connected

> Press MENU to bring up the main menu.

> Press 3 to bring up the Setup menu.

> Press 4 to bring up the Connections menu.

> Press

n to select a socket.

> Press

m or p to step through the list of

available equipment types until you fi nd what

you have connected. Select None if nothing is

connected.

> When you have selected your equipment types,

press GO to store your settings, or…

> …press EXIT to leave all menus without storing.

What is connected?

Registering the equipment connected to

BeoSystem 2 enables you to activate it with

the Beo4 remote control.

Setup

1 Tuning

2 Sound

3 Picture

4 Connections

5 Menu

6 Clock

V. Mem

AV

Decoder

V. Mem

DVD

Decoder

32

*NOTE: Choose (DTV) for a primary set-top box

and (V.AUX) or (AUX) for a secondary set-top box.

Advertising