Bang & Olufsen BeoCenter AV5 - User Guide - Manual (Page 28)

28
D A I L Y O P E R A T I O N S
Watching a programme
You will be using the following opera-
tions daily:
• Switching on to TV program numbers
• Switching on to Satellite program
numbers*
• Switching displays for TV or Satellite
on the BeoCenter AV5 display
• Turning your BeoCenter AV5 to
adjust the viewing angle
• Adjusting volume
• Switching the system off
To carry out these operations, use the
Beo4 remote control.
Instead of displaying the program
number on the BeoCenter AV5 display,
you can choose to display the name of
a station, only interrupted by the
operations you undertake.
You can turn your BeoCenter AV5 with
the Beo4 by keying in a pre-defined
stand position – 9 positions are
available, press 1 for its utmost left
position and 9 for its utmost right
position.
Finally, you can adjust the volume level
and switch the BeoCenter AV5 to
standby.
Note: If you wish to just listen to a video source,
TV, Satellite or V.Tape, without pictures on the
screen, press AV before you press TV, SAT or
V TAPE.
Press to switch on to the TV
program number you were last
watching
Press to switch on to the Satellite
program number you were last
watching
Press to step through your program
numbers
Press to select a specific program
number, pressing 0 will switch to the
program number you were last
watching
To switch displays for a station…
Press to display the name of the
current station
Press TV or SAT again to display the
program number
Press LIST until STAND is displayed
Press to turn the BeoCenter AV5
Alternatively,
Use the number keys to key in a
pre-defined stand position
Press to adjust the volume
Press right on the middle of the
volume button to mute the sound,
press again to bring the sound back
Press to switch to standby
*Note: Satellite is only available, if your
BeoCenter AV5 is especially equipped for Satellite
reception.
TV
SAT
or
0
9
through
TV
SAT
or
LIST
then
or
tt
ss
1
9
through
or
•