Bang & Olufsen BeoSystem 1 - User Guide - Manual (Page 32)

32
If you connect additional video
sources or equipment to BeoSystem 1,
you must register the equipment in
the Connections menu.
The settings you select in the
Connections menu tell BeoSystem 1
what is connected.
For information about where and
how to connect extra equipment,
refer to the chapters ‘Connect
additional equipment’ on page 44 as
well as ‘Socket panels’ on page 45.
When your additional video
equipment has been connected and
registered in the Connections menu,
as described, you can operate it with
the Beo4 remote control.
Register and use additional video equipment
Equipment you can connect to each socket
V.Tape
V.Tape… for a Bang & Olufsen video tape
recorder
DVD… for a DVD player
STB (SAT), STB (V.AUX)… for a set-top box*
None… if nothing is connected
AV
DVD… for a DVD player
STB (SAT), STB (V.AUX)… for a set-top box*
V.AUX… for other equipment
Non B&O V.Tape2… for a non-Bang & Olufsen
video tape recorder
V.Tape2… for a Bang & Olufsen video tape
recorder
S-VHS V.TP2… for a Super-VHS video tape
recorder
Decoder(2)… for a second decoder – Connect
your primary decoder to the DECODER socket
None… if nothing is connected
> Press MENU to bring up the main menu.
> Press 3 to bring up the Setup menu.
> Press 4 to bring up the Connections menu.
> Press n to select a socket.
> Press m or p to step through the list of
available equipment types until you find what
you have connected. Select None if nothing is
connected.
> When you have selected your equipment types,
press GO to store your settings, or…
> …press EXIT to leave all menus without storing.
What is connected?
Registering the equipment connected to
BeoSystem 1 enables you to activate it with
the Beo4 remote control.
Decoder
Decoder(1)… for a primary decoder or expander
box
STB (SAT), STB (V.AUX)… for a set-top box*
V.AUX… for other non-Bang & Olufsen
equipment
Non B&O V.Tape2… for a non-Bang & Olufsen
video tape recorder
None… if nothing is connected
Setup
1 Tuning
2 Sound
3 Picture
4 Connections
5 Menu
6 Clock
V. Tape AV Decoder
V. Tape DVD Decoder
*NOTE: Choose STB (SAT) for a primary set-top
box and STB (V.AUX) for a secondary set-top box.