Recording sound alone – Bang & Olufsen BeoVision Avant (1995-2005) - User Guide User Manual

Page 45

Advertising
background image

45

S P E C I A L T Y P E S O F R E C O R D I N G

Recording sound alone

The BeoVision Avant video tape
recorder can record sound alone –
without any pictures. The sound
recorded will be of very high quality.

When the video tape recorder records
sound alone, it automatically records at
half the usual speed (LP). This enables
you to record uninterruptedly for up to
eight hours if you use an E-240 tape.

Such ‘audio-only’ recordings can be
made from an audio source in your
Bang & Olufsen audio system. You can
also record the sound from your
satellite radio programmes in this way.

Recording from audio system…
There are two ways of recording sound from your
Bang & Olufsen audio system on video tape. The
method you use depends on the way your Bang &
Olufsen audio system is used with the BeoVision
Avant:

• Method 1 – Audio and video system

Your loudspeakers are connected to the audio
system (for more information of such a setup,
see page 65).

• Method 2 – Surround sound AV system

Your loudspeakers are connected to the
BeoVision Avant (for more information of this
setup, see pages 62-64).

Recording from satellite radio…
To record satellite radio programmes on video
tape, just switch on to the programme and press
RECORD twice on Beo4 to start recording. As
described for Method 1 – Audio and video system.

RADIO

3

RADIO

3

V TAPE

STOP

TV

then

RECORD

RECORD

then

RECORD

RECORD

then

LIST

then

GO

LIST

then

GO

Method 1 – Audio and video system:
Press LIST until AV* is displayed

Press to activate the audio/video
function

Press to start playing the audio
source you want to record, for
example radio program number 3

The BeoVision Avant is now in audio mode

Press to switch the video tape
recorder to recording pause
Press again to start recording

Method 2 – AV system:
Start playing the source you want
to record, for example radio
program number 3

Press LIST until AV* is displayed

Press to activate the audio/video
function and use the opposite
recorder

Press to switch the video tape
recorder to recording pause

Press again to start recording

To pause and stop recording…

Press to pause recording

Press e.g. TV to stop recording
entirely and return to normal source
operation

*Note: In order to display AV on Beo4, you must
add the function to Beo4’s list of functions, please
refer to page 67 in this guide.

Advertising