Bang & Olufsen BeoVision Avant CTV (1995-2005) - User Guide - Manual (Page 50)

50
B E O V I S I O N A V A N T C L O S E - U P …
Displayed information…
BeoVision Avant…
BeoVision Avant display bar – The display bar
gives information about the system and conceals
the buttons for close-up operation on the back.
3 STEREO
Dolby 3 Stereo* indicator
PRO LOGIC
Surround sound* indicator
RECORD
’Recording in progress’ indication for the video
tape recorder.
PT (Play Timer)
Indicates that the BeoVision Avant Timer function
for timed playback or standby is switched on.
Please refer to page 58-59 for further
information.
Note: PT remains on during standby.
“TV 12” (Status display)
Status display for the BeoVision Avant. The display
keeps you informed about what the system is
doing or about an on-going operation.
• (Standby indicator)
The red standby indicator lights up when you
switch off the BeoVision Avant.
The system may still be active – for example, if a
recording is in progress (RECORD will then be lit).
Note: Please refer to the BeoVision Avant
Setting-up guide for information about the
various sockets on the rear panel.
* Manufactured under license from
Dolby Laboratories Licensing Corporation
Note: Dolby 3 Stereo and the Dolby Pro Logic Surround are
only available in BeoVision Avant models equipped with a
Dolby Pro Logic Surround module. Please contact your Bang &
Olufsen dealer for further information.