Bang & Olufsen DVD 1 - User Guide - Manual (Page 22)

22
DVD 1 is constructed for use with
the Beo4 remote control.
However, DVD 1 functions are
accessible via Beo1, the remote
control included with the BeoVision 1
television.
Follow the instructions on this page
to gain access to DVD 1 functions
with the Beo1 remote control.
If you have…
…a Beo1 remote control
Use the arrow key pad on Beo1 to navigate
through on-screen menus and to select
options in those situations when you would
otherwise use the numeric or coloured keys
on Beo4.
GO
DISPLAY
▲
▼
ss tt
GO
DISPLAY
STOP
Buttons on Beo1
Press to change chapters or tracks on a disc or
to move up and down through menu choices.
Press to cue forward or backward on a disc;
press ss to back through on-screen menus.
Press to accept, select, start or store your
choice; press and hold GO during playback to
call up the DVD disc menu.
To bring up the on-screen tool bar (described
on page 12), press and hold DISPLAY during
DVD playback. When DVD MENU appears in
the display on the BeoVision 1 screen, press
GO*.
On the back of your Beo1:
Press to pause or stop playback completely.
*NOTE! For some BeoVision 1 televisions,
pressing GO is not necessary. However, if the
on-screen tool bar does not appear, even after
pressing GO, you can bring up the DVD 1 player
menu via the DVD SETUP menu. Choose
DVD MENU from the options available and
press GO.