Bang & Olufsen DVB-HD - Getting Started - Manual (Page 4)

Watch television via the DVB module
Useful hints
Remote control
DVB guide
1 *Activate the DVB module
2 *Multifeed
The instructions in this Getting Started are based on a remote control with the navigation button enabled. Both Beo5 and
Beo4 instructions are described. For information about the navigation button, see your television guide.
For more extensive and updated information, look up the DVB guide on www.bang-olufsen.com/guides.
If the television tuner is deactivated, use the TV button to switch on the DVB module. See the guide enclosed with your
television for further information.
Multifeed is only available if supported by your programme provider.
When your television is equipped with the DVB module,
you can receive digital terrestrial, cable and satellite
programmes depending on your module options.
Select a DTV channel
Select a function* 2
Use channel or station groups
Bring up a channel or station list
Beo5 operation
Activate the DTV source to use these functions
Change subtitles/audio options
Bring up a Programme Guide
Switch between groups and bring up an overview of groups.
When no menu is shown on the screen, you can bring up menus for
additional audio and subtitles options, if available.*
4
The Programme Guide contains information about the current and
following programmes on all available channels.* 5
En
gl
ish
Bring up a channel list for the current group and select a channel.
RADIO
PROGRAMME GUIDE
MENU
INFORMATION
CHANNEL GROUPS
SUBTITLES LANGUAGE
AUDIO LANGUAGE
SETUP
CHANNEL LIST
CA
MULTIFEED
1
2
3
4
5
6
7
1
2
3
4
5
6
7
RADIO
PROGRAMME GUIDE
MENU
INFORMATION
CHANNEL GROUPS
SUBTITLES LANGUAGE
AUDIO LANGUAGE
SETUP
CHANNEL LIST
CA
MULTIFEED
4
DVB function
Beo4 button