Bang & Olufsen BeoLab 4 - User Guide - Manual (Page 7)

Power Link connections: These
connections carry both the right
and left sound signals. There fore,
you can:
1 Run a Power Link cable from the
Bang & Olufsen system directly
to each loud speaker.
Or
2 Use a Power Link adapter (optional
accessory, available from your
Bang & Olufsen retailer). Run a
cable from the Bang & Olufsen
system to the fi rst loud speaker,
and then run another cable from
the fi rst loud speaker to the next.
This will often help to minimise
cable clutter.
Cable Clamp: For safety reasons,
the mains lead must be secured to
the loud speaker with the cable
clamp provided. The cable clamp
holds both the mains lead and the
loud speaker cable.
Power Link cables: The Power Link
cables must be of the new type
(marked with a triangle on the plug).
Do not use any old type Power Link
cables, as this will cause noise, and
thus not give optimum sound
quality!
Power Link
Mk 3
LEFT RIGHT
1
LEFT RIGHT
2
7