Bang & Olufsen BeoCenter 2 Socket Unit - User Guide - Manual (Page 5)

You can fasten the Socket unit either horisontally or
vertically. Note that the lock mechanism of the
wall bracket requires that the sockets face down-
ward if you mount the Socket unit horisontally.
Cover for sockets: To gain access to the sockets,
it is necessary to remove the cover. Lift one end of
the cover, slide the cover to the side and lift it off.
The cables must be lead through the openings at
each end of the Socket unit.
Mains lead: For security reasons the cover must
be mounted. When the mains cord has been lead
through the opening at the end of the Socket unit
and the cover has been mounted, the mains cord
cannot be pulled out of the socket by accident.
1 2
5