Bang & Olufsen BeoSound Century - User Guide - Manual (Page 14)

U S I N G T H E C D P L A Y E R
14
Playing a CD
Starts playing the CD you have
loaded into the CD player
Press to pause the CD player
Press to resume playing
Press to browse through the tracks
on the CD, forwards...
or
...or backwards
Alternatively, key in the number for
the track you want to hear,
for example track number 5
Press to raise the volume
Press to lower the volume
Press to switch the system to stand-
by
Selecting another source also turns
off the CD player
CD
STOP
CD
5
STEP
>
<
STEP
∧
∨
●
0 1 2 3 4 5 6 7 8 9
RADIO CD TAPE AUX < STEP
MODE
STOP
REC
STEP >
STORE
TUNE
SOUND LOAD
Pressing the CD button starts the CD
player: the display and all the buttons
for operating the CD player light up,
and the first track from the CD you have
loaded starts playing.
The track number is indicated in the
display: 1.
You can pause the CD player any time
by pressing STOP. To resume playing,
just press the CD button again.
To select another track from the CD,
you can either key in its number
directly using the number buttons, 0 - 9;
or you can browse through all the
tracks on the CD using the step buttons,
<
STEP or STEP
>
.
When the CD has been played through
once, the CD player stops, waiting for
another instruction to play.
If you select another source, the CD
player stops automatically. To switch off
the entire system, press the stand-by
button,
●.
Note: If the CD player is left paused or stopped for
more than 30 minutes, the system switches to
stand-by.
The other functions offered by the CD player are:
● Switching between various display indications:
track number, track time and remaining disc
time (see page 15).
● Playing tracks in random order (see page 15).
● Recording the CD you are listening to, and
recording specific tracks (see pages 18 - 19).