Beo5 power consumption – Bang & Olufsen Beo5 - User Guide User Manual
Page 15

If you are unable to switch on
the Beo5 remote control when
you press and hold the centre
button, it needs to be recharged.
If Beo5 is completely discharged,
place it in the charger shortly
and it will have sufficient
capacity for you to switch on the
TV or radio. Then leave it to
charge while you watch or listen.
Beo5 Power consumption
Beo5 consumes power when
switched on, in particular when the
backlight is lit. Therefore your Beo5
will slowly power down when it is
not in use:
– After 10 seconds, the backlight is
dimmed
– After 20 seconds, Beo5 will go
into standby mode and display a
black screen
To change these settings, refer to
page 17 in this Guide.
The charger has a magnet to hold
Beo5 firmly in place. When you
remove the remote control you have
to tilt it slightly to release it from the
charger.
1
2
15