Bang & Olufsen EarSet 2 - User Guide - Manual (Page 8)

>> English
Register the headset to your
mobile phone
To be able to use the headset, you
must fi rst register it to a mobile
phone with Bluetooth or to a
similar device with a hands-free
profi le.
You can only register the headset
to one mobile phone or device at a
time.
To register the headset …
> Switch on the mobile phone.
> If you are registering the headset
for the fi rst time, fold the
microphone arm out. This
switches on the headset. The
indicator light fl ashes red and
green.
> Activate the search function on
your mobile phone as described
in the guide enclosed with the
phone. When the mobile phone
fi nds the headset, the headset is
identifi ed as EarSet 2 in the
mobile phone’s display.
> If you are prompted for a
pincode by your mobile phone,
enter 0000. The headset is now
registered to the phone.
> If registration fails, switch off the
headset and repeat the
procedure.
Register the headset to a new
mobile phone
> Switch on the mobile phone. Do
the next three steps in fi ve
seconds or less.
> Press and hold the switch.
> Fold the microphone arm out.
> When the indicator light flashes
red and green, release the
switch.
> Activate the search function on
your mobile phone as described
in the guide enclosed with the
phone. When the mobile phone
fi nds the headset, the headset is
identifi ed as EarSet 2 in the
mobile phone’s display.
> If you are prompted for a
pincode by your mobile phone,
enter 0000. The headset is now
registered to the phone.
> If registration fails, switch off the
headset and repeat the
procedure.
8