Bunn FCD-4 - Manual (Page 3)

3
USER NOTICES
Carefully read and follow all notices on the equipment and in this manual. They were written for your protec-
tion. All notices are to be kept in good condition. Replace any unreadable or damaged labels.
27442.0000 00986.0002
33461.0000
! WARNING
DO NOT OVERLOAD CIRCUIT.
ALWAYS ELECTRICALLY GROUND THE CHASSIS
OR ADAPTOR PLUG.
DO NOT DEFORM PLUG OR CORD.
FOLLOW NATIONAL AND LOCAL ELECTRICAL CODES.
KEEP COMBUSTIBLES AWAY.
FAILURE TO COMPLY RISKS EQUIPMENT
DAMAGE, FIRE OR SHOCK HAZARD.
READ THE ENTIRE OPERATING MANUAL
BEFORE USING THIS PRODUCT
00986.0002E 5/98 ©1994 Bunn-O-Matic Corporation
CHARGE
Type R134A, Amount 10 oz
Design Pressures: High 335 Low 88
33496 030901
MAXIMUM RINSE WATER TEMPERATURE: 170˚F (76.6˚C)
Use Bunn-O-Matic tubing, part number 32759.10XX
(See Illustrated Parts Catalog for complete part number)
for hot water connection.
Alternate Connection
(When Hot Water source is not available)
Hot Water
connection
(See Caution)
RINSE WATER
CONNECTION RINSE WATER
CONNECTION
• Use Bunn-O-Matic tubing, part number 32759.10XX for all connections.
(See Illustrated Parts Catalog for complete part number)
• Clamp all hose connections with Bunn-O-Matic part number 21275.0003 (hose clamp)
3/8" x 3/8" x 3/8" Barb Tee
B.O.M. PN 32750.0000
(may be installed internal or
external to the dispenser)
33648.0000C 01/01 ©2000 BUNN-O-MATIC CORPORATION
NOTES:
Cold Water
Connection
Cold Water
Connection
Hot Water Rinse Connection
MAIN WATER
CONNECTION
MAIN WATER
CONNECTION
33648.0000