Baumfolder BAUM20: 1300 series Pump Replacement Manual - Manual (Page 10)

TP10404 PAGE 10
PRE-DCT 500 (MID-YEAR 1999 OR BEFORE)
MACHINES DO NOT REQUIRE OVERLOAD
RELAY. DCT 500 (MID-YEAR 1999 TO DATE)
REQUIRE A CHANGE TO OVERLOAD RELAY
DUE TO HIGHER RATING OF AMPERES WITH
BECKER PUMPS. WHEN REPLACING OVER-
LOAD RELAY MAKE NOTE OF WIRE LOCATIONS
PRIOR TO REMOVAL.
EXCHANGE OVERLOAD RELAY AND REWIRE AS
NOTED BEFORE, MAKING SURE RELAY IS SET
FOR AUTOMATIC OPERATION AND SET DIAL TO
11.0 AMPERES FOR 3 PH MACHINES AND 13.0
FOR 1PH MACHINES.
VIEW BELOW SHOWS LOCATION OF OVERLOAD
RELAY IN MAIN CONTROL.
F4
F8
K2
OL1(OVERLOAD RELAY)
K1