Baumfolder 714XA User Manual
Page 44
Advertising
PAGE 41 TP10583
I.) Manually move the paper stop away from home position enough so
that you may use a 4mm allen wrench in the flat head screws on the
paper stop. The screws will be adjusted to position the paper stop
correctly for the new home position. See Figure #10.
J.) Use a 10mm wrench to loosen up the nuts on the flat screws. See
Figure #10.
Figure #10
HOME POSITION
SCREW JAM NUTS
HOME
POSITION
SCREWS
LOWER
HALF
PAN
BRACE
Advertising