Baumfolder BaumCut 26.4: side table - Manual (Page 3)

Install (2)
black
plastic
threaded
inserts into
the large
holes from
the inside of
the table.
These are for the back plate that will
be mounted later.
Locate the
mounting
brackets
and
hardware
shown at
the right.
Assemble mounting brackets to table
as shown
Align side
table with
mounting
bracket as
shown.
Align side
table as
shown with
existing
cutter table.
Level table
using
straight
edge
Adjust the
height by
turning leg
adjustment
screws to
make table
level.