Bendix Commercial Vehicle Systems BACKSPOTTER - Manual (Page 13)

Installation
Harness Extension
The interconnect harness provided is 40 feet (14 meters) long, from sensor to
rear sensor display. Additional 20-foot (7 meter) extensions can be purchased for
applications requiring additional length (P/N 41365-100).
Radar Sensor Power Connection
Locate the vehicle’s reverse light power source and connect to the red power wire
on the sensor harness using 18 AWG wire. Connect the black ground wire of the
sensor harness to the vehicle ground.
The sensor should only have power when the transmission is in reverse.
Interconnection Table
Harness Lead
Vehicle Connection
Red Connect to Reverse Lamp Power (+12 v)
Black Connect to Vehicle Chassis Ground
BENDIX
+ 12 V
To Rev
Lamp
To Rear Sensor Display
Red
Black
9