Introduction/operation, Self adjusting brake adjuster identification – Bendix Commercial Vehicle Systems AUTO SLACK ADJUSTER SERVICE MANUAL User Manual
Page 5
Advertising
4
Introduction/Operation
Self Adjusting Brake Adjuster Identification
The serial and part numbers are stamped on the facing of the
self adjusting brake adjuster. The serial number is used
for control purposes. The part number describes the self
adjusting brake adjuster specification.
808125
MFD. IN U.S.A.
BY HALDEX
MFD. IN U.S.A.
BY HALDEX
P/N813638
S/N06491
10068
10068
4WF
4WF
1A107
1A107
10068
4WF
1A107
PART
NUMBER
SERIAL
NUMBER
MANUFACTURER
NUMBERS
Advertising