Barco Coronis Fusion 10MP - Manual (Page 48)

48 Coronis Fusion 10MP
P
OWER CONNECTION
-
DISPLAY WITH EXTERNAL
24 VDC
POWER
SUPPLY
• Power requirements: The display must be powered using the
delivered medical approved 24 VDC SELV power supply.
• The medical approved DC power supply must be powered by the
AC mains voltage (protective earth terminal).
P
OWER CORDS
:
• Utilize a UL-listed detachable power cord, 3-wire, type SJ or
equivalent, 18 AWG min., rated 300 V min., provided with a
hospital-grade type plug 5-15P configuration for 120V application,
or 6-15P for 240V application.
• Do not overload wall outlets and extension cords as this may result
in fire or electric shock.
• Mains lead protection (U.S.: Power cord): Power cords should be
routed so that they are not likely to be walked upon or pinched by
items placed upon or against them, paying particular attention to
cords at plugs and receptacles.
W
ATER AND MOISTURE
Never expose the display to rain or moisture.
Never use the display near water - e.g. near a bathtub, washbasin,
swimming pool, kitchen sink, laundry tub or in a wet basement.
V
ENTILATION
Do not cover or block the ventilation openings in the cover of the set.
When installing the display in a cupboard or another closed location,
heed the necessary space between the set and the sides of the
cupboard.
I
NSTALLATION
Place the display on a flat, solid and stable surface that can support the
weight of at least 3 displays. If you use an unstable cart or stand, the