Bird Technologies SK-4000-TC-Manual - Manual (Page 24)

12
Figure 6 Setting the Scale
Tracing Mode Setting
1. Press the Test Icon to choose the specific line.
Note: The active Tracing line will be highlighted.
2. Choose one or more of the following:

Max_Value Set
a. Double Click to Active.
b. Enter a maximum value.

Min_Value Set
a. Double Click to Active.
b. Enter a minimum value.

Tracing Count Setting
Note: SiteHawk has four trace lines.
a. Press the left Icon.
b. Choose a specific line.
Note: Every trace line has a independent name, which can’t be
changed.Trace Name include the number, like as:Tr1,Tr2,Tr3,Tr4.
Note: Every Trace has a default setting (appendix), such as: mea-
surement parameters, format, scale, color and so on, this parameter
can be reset by user.