Bird Technologies SH-36S-RM-Manual - Manual (Page 26)

Bird Technologies
10
Figure 5 Found New Hardware Wizard
11. Click “Next”.
12. Follow the instructions that are presented.
13. Click “Finish” in the Completing the Found New Hardware Wizard
window.
Figure 6 Completing the Found New Hardware Wizard
14. Launch the SignalHawk program.

Note:
PC SignalHawk can be used in any orientation.
15. Select the unit from the DSP Device List, if necessary.
16. Connect RF signal.
17. Connect a TTL trigger source to the BNC connector, if necessary.