Bird Technologies AT-500-Manual - Manual (Page 42)

Bird AT-500 Antenna Tester
24
Start Stop MHz
Note:
The cursor will blink on the start fre-
quency and Start Stop MHz will be highlighted.
1. Enter the frequency using the numeric keypad or
change the frequency using the UP/DOWN arrow keys.
2. Press the ENTER key. The cursor will blink on the
stop frequency.
3. Enter the frequency using the numeric keypad or
change the frequency using the UP/DOWN arrow keys.
4. Press the ENTER key. The tester will begin sweeping.
Center MHz
Note:
The cursor will blink on the Center
frequency and Center MHz will be highlighted.
1. Enter the frequency using the numeric keypad or
change the frequency using the UP/DOWN arrow keys.
2. Press the ENTER key.
Note:
The tester will begin sweeping.
3. Press the SPAN key.
4. Enter the frequency using the numeric keypad or
change the frequency using the UP/DOWN arrow keys.
5. Press the ENTER key.
Note:
The tester will begin sweeping.