Blodgett KTT-E Series - Manual (Page 9)

9
3.0 OPERATION INSTRUCTIONS (Continued)
TILTING INSTRUCTIONS
Your kettle has the standard “Clean Lock” feature and may not be tilted without disengaging the
tilt knob located on the console at the top right. This feature locks the kettle in the upright
position and also allows the operator to lock the kettle at 105° for ease of cleaning. To tilt the
kettle the full distance, the tilt lock knob must be disengaged from the cleaning position by
pulling out the tilt lock knob and tilting the kettle forward the full distance. Follow these steps to
tilt kettle:
1. Pull out the tilt knob near top right of console.
2. Using kettle tilt handle pull kettle forward to desired angle of pour or until kettle locks at
105°. The tilt knob can be released after the kettle has been tilted approximately 10°.
3. Kettle will lock in position at 105° and may be tilted further by pulling the tilt lock knob a
second time allowing the kettle to tilt the full distance.
4. To return the kettle to the upright position, pull out the tilt lock knob and tilt the kettle upward
until it locks in the upright position. The kettle should not move in either direction once in the
upright position.