Bird Technologies SA-6000EX - Manual (Page 71)

Fault Location Mode
55
Figure 24 Select Cable Type from List
3. Continue to the next topic in this section (Setting the Distance and
Units, page 56)
Step Action
1 Press the Config key
2 Press the Cbl Type softkey
3 Press the right or left scroll keys to select
Cable List
4 Press the up or down scroll keys to open
the cable list
5 Press the up or down scroll keys to select
an item on the list
6 Press the Enter key to accept the selection
7 Press the Esc key to exit the configuration
screen