Brookstone Carbon Monoxide Alarm - Manual (Page 8)

installation instruCtions
1. turn gas grill burner control knob oFF, turn propane supply oFF
at cylinder.
2. Move gas grill to an open, well-ventilated outdoor area prior to
disconnecting/connecting to outlet of propane cylinder service valve.
3. Make sure all connections are clean. Adjust gauge to desired position.
Hand tighten the plastic coupling nut clockwise to the large outside
threads on the propane cylinder service valve until the connection
seals properly. (see Figure 2)
4. With gauge in desired position for easy reading, attach the regulator
to the Grill Gauge by hand tightening the regulator plastic coupling
nut clockwise to the large outside threads on the Grill Gauge.
5. to disconnect Grill Gauge from cylinder service valve outlet, turn oFF
appliance(s) burner control knob(s); turn oFF propane supply at cylinder.
turn plastic coupling nut counter clockwise until it disengages from
large outside threads on cylinder service valve outlet.
6