Brother DCP-6690CW - Manual (Page 28)

Chapter 2
22
Loading documents
2
You can make copies, and scan from the ADF
(automatic document feeder) and from the
scanner glass.
Using the ADF
2
The ADF can hold up to 50 pages and feeds
each sheet individually. Use standard
80 g/m
2
paper and always fan the pages
before putting them in the ADF.
Recommended environment
2
Document Sizes Supported
2
How to load documents
2
CAUTION
DO NOT pull on the document while it is
feeding.
DO NOT use paper that is curled, wrinkled,
folded, ripped, stapled, paper clipped,
pasted or taped.
DO NOT use cardboard, newspaper or
fabric with the ADF. Instead use the
scanner glass.
Make sure documents written with ink are
completely dry.
a
Unfold the ADF Document Support (1)
and the ADF Document Output Support
Flap (2).
b
Fan the pages well.
c
Place your document, face up, top
edge first in the ADF until you feel them
touch the feed roller.
Note
Insert A4/Letter documents short-edge
first.
Temperature: 20 ° C to 30° C
Humidity: 50% to 70%
Paper:
80 g/m
2
Length: 148 to 431.8 mm
Width: 148 to 297 mm
Weight: 64 to 90 g/m
2
1
2