Blizzard Lighting Motif Fresco (Rev A) - Manual (Page 12)

Page 12
Motif Fresco™ Manual Rev. A Copyright (c) 2014 Blizzard Lighting, LLC
Static Colors
1.) To use any of the built-in static colors, use the <MODE> button to scroll to Pr-01,
and hit <SETUP>. Use the <UP/DOWN> buttons to scroll through the static color
choices. Push the <SETUP> button to confirm your choice.
2.) Now you can adjust the strobe speed by selecting the strobe speed adjustment set-
tings of FS00 - FS99 (slow <--> fast).
Built-in Programs
1.) To set the fixture to run a single built-in program, use the <MODE> button to scroll
to Pr--, and press the <SETUP> button. Then use the <UP/DOWN> buttons to scroll
through the built-in program choices of Pr02-Pr07 and push the <SETUP> button.
2.) Now you can adjust the speed of the program by using the <UP/DOWN> buttons
and choose from SP01 - SPFL (slow <--> fast), and push the <SETUP> button. To
conclude setup, you now have the option to adjust the strobe speed of the program by
selecting the strobe adjustment settings of FS00 - FS99 (slow <--> fast).
Auto Mode
1.) To set the fixture to run in auto mode, use the <MODE> button to scroll to AUTO,
and hit <SETUP>.
Manual Color Adjustment:
Allows the user to adjust the color balance of the fixture. These settings are global, they
will effect all modes.
1.) Use the <MODE> button to navigate to Colr and hit the <SETUP> button.
2.) From here, you can navigate to r255, 9255, or b255 and use the <UP/DOWN>
buttons to adjust the global intensity of red, green, or blue from 000-255.
Restore Factory Settings
1.) First, unplug the power to the fixture so the fixture is off.
2.) Press and hold down the <MODE> and <SETUP> buttons together.
3.) While still holding down the two buttons, plug the power back in. Data restoration
will initialize, resetting the unit back to its original factory settings.