Blizzard Lighting PixelStorm 240(Rev A) - Manual (Page 12)

Page 12
PixelStorm™ 240 Manual Rev. A Copyright (c) 2012 Blizzard Lighting, LLC
Setting the DMX Channel Mode:
To control the PixelStorm™ 240 in DMX, first select from one of the DMX control channel modes
(3/4/7/10/16/24, or 28 channel mode.)
1.) To select a DMX channel mode, press the <MENU> button, then use the <UP> or <DOWN> buttons
until the display reads
Chnd
and press the <MENU> button.
2.) Then use the <UP> or <DOWN> buttons until the display reaches your desired channel mode.
3.) Press the <MENU> button to confirm
.
Setting the DMX Address:
1.) Press the <MENU> button, then use the <UP> or <DOWN> buttons until the display reads
Addr
and
press the <MENU> button.
2.) Use the <UP> and <DOWN> buttons to set the appropriate DMX address from
d001 -d512
.
3.) Press the <MENU> button to confirm
.
Built-in Programs:
1.) Press the <MENU> button, then use the <UP> or <DOWN> buttons until the display reads
Pr--
, and
press the <MENU> button.
2.) Then use the <UP> and <DOWN> buttons to choose your desired program from
Pr00-Pr25,
and
press the <MENU> button.
3.) To adjust the speed, use the <UP> or <DOWN> buttons until the display reads
SP--
and press the
<MENU> button.
4.) Then use the <UP> and <DOWN> buttons to set your desired speed from
SP00
to
SP15
.
5.) Press the <MENU> button to confirm
.
Flash and Fade Modes:
1.) Press the <MENU> button, then use the <UP> or <DOWN> buttons until the display reads
FLAS
or
FAdE,
and press the <MENU>
.
2.) Then use the <UP> and <DOWN> buttons to set your desired speed from
FL00
to
FL15,
or
FA00
to
FA15
.
3.) Press the <MENU> button to confirm
.
Auto Mode:
1.) Press the <MENU> button, then use the <UP> or <DOWN> buttons until the display reads
ASC-
and
press the <MENU> button. This will run
Pr08-Pr25
in sequence.
2.) Then use the <UP> and <DOWN> buttons to choose your desired speed from
AC00-AC15,
and press
the <MENU> button.
Sound Active Mode:
1.) Press the <MENU> button, then use the <UP> or <DOWN> buttons until the display reads
SouA
, and
press the <MENU> button.
2.) Use the sensitivity knob to adjust sound sensitivity.
Custom Color Adjustments:
1.) Press the <MENU> button until the display reads
r255
(Red intensity, 0-255), or
G255
(Green inten-
sity, 0-255),
b255
(Blue intensity, 0-255)
2.) Please note that these settings will effect the fixture GLOBALLY, IE in any mode.
Slave Mode:
1.) Press the <MENU> button, then use the <UP> or <DOWN> buttons until the display reads
SLAU
and
press the <MENU> button.