Blizzard Lighting Seven-6 ProPar - Manual (Page 12)

Page 12
ProPAR 7.6 Manual Rev. A © 2014 Blizzard Lighting, LLC
DMX Mode
Allows the unit to be controlled by any universal DMX controller.
Set the Starting DMX Address:
The default mode for the fixture is DMX, so the first menu item that you can edit is the
starting DMX address.
1.) Navigate the menu using the <UP/DOWN> buttons until you reach A.001.
2.) Push the <ENTER> button.
3.) Use the <UP/DOWN> buttons to select a DMX channel from 001-512.
4.) Press the <ENTER> button to confirm.
Select the DMX Channel Mode:
1.) Navigate the menu using the <UP/DOWN> buttons until you reach ChNd.
2.) Push the <ENTER> button.
3.) Use the <UP/DOWN> buttons to select either hSu, ch.06, ch.08, or ch.11.
4.) Press the <ENTER> button to confirm.
Slave Mode:
To synchronize one or more fixtures to follow the actions of the Master fixture (the 1st unit in
the DMX chain), perform the following steps on each Slave fixture:
2.) Navigate the menu using the <UP/DOWN> button until you reach SLAu.
3.) Push the <ENTER> button.
4.) Use the <UP/DOWN> buttons to select SLAu.
5.) Press the <ENTER> button to confirm.
Auto, Stand-Alone, & Built-in Program Modes:
Allows a single or Master/Slaved units to run factory installed programs at user selectable speeds.
Built-In Static Colors:
1.) Navigate the menu using the <UP/DOWN> button until you reach chAS.
2.) Push the <ENTER> button.
3.) Use the <UP/DOWN> buttons to navigate to coLr, and press <ENTER>.
4.) Use the <UP/DOWN> buttons to select from cl.01-cl.31.
5.) Press the <ENTER> button to confirm.
Auto Mode:
1.) Navigate the menu using the <UP/DOWN> button until you reach chAS.
2.) Push the <ENTER> button.
3.) Use the <UP/DOWN> buttons to navigate to AUto, and press <ENTER>.
4.) Use the <UP/DOWN> buttons to select from at.01-at.02, and press <ENTER>.
5.) Use the <UP/DOWN> buttons to select the speed from t0.01-t0.30 (fast <-> slow).
Custom Program Mode (Standalone):
Create/edit up to 6 custom programs of up to 30 scenes for playback in standalone mode.
1.) Navigate the menu using the <UP/DOWN> button until you reach Edit.
2.) Push the <ENTER> button.
3.) Use the <UP/DOWN> buttons to navigate custom programs from Pr.01-Pr.06.
5.) Press the <ENTER> button.
5.) Use the <UP/DOWN> buttons to select a scene from Sc.01-Sc.30.
5.) Press the <ENTER> button.
4.) Use the <UP/DOWN> buttons to select r.--- (red), G.--- (green), b.--- (blue), A.---
(amber), U.--- (white) or u.--- (UV), and press <ENTER>.
4.) Using the <UP/DOWN> buttons, select the maximum level for each color between
x.000-x.255 (000=off), then press <ENTER> to store your scene.
5.) Repeat this process up to 30 times for each of the 6 custom program banks.