Blizzard Lighting FX SnowBlind (Rev B) - Manual (Page 12)

Page 12
SnowBlind™ FX Manual - Rev. B Copyright (c) 2013 Blizzard Lighting, LLC
4. OPERATING ADJUSTMENTS
The Control Panel
All the goodies and different modes possible with the SnowBlind™ FX are accessed by
using the control panel on the side of the fixture. There are 4 control buttons below the
LED display which allow you to navigate through the various control panel menus.
<MODE>
Is used to navigate the various modes.
<SETUP>
Is used to enter into the selected mode setup.
<UP>
Scrolls through menu items and numbers in ascending order.
<DOWN>
Scrolls through menu items and numbers in descending order.
The Control Panel LED Display shows the menu items listed on the Control Panel Menu
Structure below. Pushing the <MODE> button repeatedly will scroll through the menu
settings. To edit one, push the <SETUP> button. Then use the <UP> and <DOWN>
buttons to scroll through your choices (if applicable). Push the mode button to confirm.
Control Panel Menu Structure
d -- 001 - 255
DMX Starting Address
CON 000 - 255
Brightness Adjustment (0% <-->100%)
Pro Pr.1 - Pr.4
Built-in programs 1-4 <SETUP>
SP.1 - SP.9
Speed Adjustment (Slow <--> Fast)
AUT
<SETUP> Sets the Fixture to Auto Mode
SP.1 - SP.9
Speed Adjustment (Slow <--> Fast)
Sd1
<SETUP> Sound Active Mode 1
Sd 2
<SETUP> Sound Active Mode 2
SLA
<SETUP> Sets the Fixture to Slave Mode
NOTE: If buttons are not pressed within 20 seconds, the LED display will shut off.
Mode Setup doWN up