Blizzard Lighting The Puck Q6A Unplugged (Rev. B) - Manual (Page 10)

Page 10
The Puck Q6: Unplugged Manual Rev. B Copyright (c) 2012 Blizzard Lighting, LLC
4. OPERATING ADJUSTMENTS
NOTE: After making any adjustment, hold the <MENU> button for approximately
3 seconds, otherwise the fixture will return to the correct mode after approxi-
mately 10 seconds.
DMX Mode
Allows the unit to be controlled by any universal DMX controller.
1.) The default mode for the fixture is DMX, which appears as
Addr
on the LED
Readout. Use the <ENTER> button then the <UP> and <DOWN> buttons to
choose a channel between
1
and
512
. Press <ENTER> again to confirm.
2.) To change between 4 and 7 channel DMX mode, select
ChNd,
then press
<ENTER>. Select either
7Ch
or
4Ch
, then press <ENTER> again to con-
firm.
Master/Slave Mode (Auto/Sound Active/Color Preset/Custom):
Allows you to link up to 32 units together without a controller.
1.) Use standard DMX cables to daisy chain your units together via the DMX con-
nector on the rear of the units.
2.) Choose a unit to function as the Master. Select MAST. The master unit must
be the first unit. Finally, chain the units together using DMX cable.
Master
SLNd
then
NASt
to confirm.
3.) Select slave function by using the <UP>/<DOWN> keys to reach SLAV in
the Master/Auto menu on the slave units, and they will react in the same as the
Master.
Slave
SLNd
then
SLAu
to confirm.
NOTE: Fixtures in slave mode will display “
STBY
“ (Standby). This is NORMAL.
Return the fixture to master mode to use it as a standalone fixture.
4.) On the master fixture, use the <UP>/<DOWN> keys to reach SHND, which
allows you to select the Master/Slave mode.
Sound active
SoUn
then <ENTER> to confirm.
Auto mode
CoLo
then
Auto,
then <ENTER> to confirm.
Color preset
CoLo
then
CoL 1 - CoL 15,
<ENTER>.
Fade Mode
FAdE
then
SP 1 - SP 8,
<ENTER>.
NOTE: Speed 1 = Fastest (Approx. 1.5 sec. per color), Speed 8 = Slowest (Approx.
2 min. per color).