Blizzard Lighting CSI Xtreme The Puck (Rev A) - Manual (Page 12)

Page 12
The Puck CSI Xtreme User Manual Rev. A Copyright (c) 2013 Blizzard Lighting, LLC
4. OPERATING ADJUSTMENTS
The Control Panel
All the goodies and different modes possible with the Puck™ CSI Xtreme are accessed by
using the control panel on the rear of the fixture. There are 4 control buttons below the
LED display which allow you to navigate through the various control panel menus.
<MENU>
Is used to navigate to the previous higher-level menu item.
<UP>
Scrolls through menu items and numbers in ascending order.
<DOWN>
Scrolls through menu items and numbers in descending order.
<ENTER>
Is used to select and confirm/store the current selection.
The Control Panel LED Display shows the menu items you select from the menu map
below. When a menu function is selected, the display will show immediately the first
available option for the selected menu function. To select a menu item, press <ENTER>.
Press the <MENU> button repeatedly until you reach the desired menu function. Use the
<UP> and <DOWN> buttons to navigate the menu options. Press the <ENTER> button
to select the menu function currently displayed, or to enable a menu option. To return to
the previous option or menu without changing the value, press the
<MENU> button.
Control Panel Menu Structure
d --- d001 - d512
4 channel mode / choose DMX address
A --- A001 - A512
8 channel mode / choose DMX address
FF -- FF01 - FF99
Fade mode
r --- r001 - r255
1st LED group intensity
G --- G001 - G255
2st LED group intensity
b --- b001 - b255
3st LED group intensity
U --- U001 - U255
4th LED group intensity
dEoo --
Auto run mode
SoUd --
Sound active mode
SLAV --
Sets fixture to run in slave mode