Blizzard Lighting RGB (CP) The Puck (Rev C) - Manual (Page 14)

Page 14
Puck Couch Potato RGB Manual Rev. C Copyright (c) 2013 Blizzard Lighting, LLC
4. OPERATING ADJUSTMENTS
NOTE: After making any adjustment, hold the <MENU> button for approximately 3
seconds, otherwise the fixture will return to the correct mode after approximately 10
seconds.
DMX Mode
Allows the unit to be controlled by any universal DMX controller.
1.) The default mode for the fixture is DMX, which appears as
Addr
on the LED
readout. Push the <ENTER> button then the <UP> and <DOWN> buttons to
choose a channel between
1
and
512
. Press <ENTER> again to confirm.
2.) To change between DMX channel modes, select
ChNd
, then press
<ENTER>. Select either
6Ch
or
3Ch
, then press <ENTER> again
to confirm.
Master/Slave Mode (Auto/Sound Active/Color Preset/Custom):
Allows you to link up to 32 units together without a controller.
1.) Use standard DMX cables to daisy chain your units together via the DMX connector on
the rear of the units.
2.) Choose a unit to function as the Master. The master unit must be the first unit.
Master:
SLNd
then
NASt
to confirm.
3.) Then set other fixtures to slave run in slave mode by using the same procedure.
Slave:
SLNd
then to confirm.
NOTE: Fixtures in slave mode will display
\
. This is NORMAL. Return the fixture to
master mode to use it as a standalone fixture.
4.) On the master fixture, use the <UP>/<DOWN> keys to reach
Shnd
, which allows
you to select other functions:
Sound active
SoUn
then
S1 - S3,
<ENTER>.
S1
= Sound Active + Strobe
S2
= Sound Active - Color Snap
S3
= Sound Active + Fade
Auto mode
Auto
then
SP --
<ENTER>, then choose speed 1-8.
Color preset
CoLo
then Scroll through built-in colors, <ENTER>
Color fade
FAdE
then
SP --
<ENTER>, then choose speed 1-8.
NOTE: Speed 1 = Fastest (Approx. 1.5 sec. per color), Speed 8 = Slowest (Approx. 2 min.
per color).
SL 96
P 6 r