Blizzard Lighting RGBA (CP) The Puck (Rev A) - Manual (Page 15)

Page 15
Puck Couch Potato RGBA Manual Rev. A Copyright (c) 2012 Blizzard Lighting, LLC
To set a custom color in Master/Slave / Standalone Mode:
Using this function, you can select any color by adjusting the Red, Green and Blue values
from 0-255. You may also adjust the color balance of the fixture.
Please note that modifying the values in this step will affect ALL modes, therefore
we recommend resetting all levels to their highest value (255) after using this
mode.
1.) Select
NAnu
from the control panel, then hit <ENTER>.
2.) Choose
rEd, GrEE
,
bLuE, or ANbE
, then hit <ENTER> to confirm.
3.) Using the <UP>/<DOWN> keys, select the color you wish to display by
varying Red/Green/Blue/Amber intensity between 0 and 255, then hit <ENTER>
to confirm each color choice.
4.) Select Color preset mode as instructed above, then select
Co 15.
then
<ENTER> to confirm.
Stuck? Want More
Information?
Check out our
helpful tutorial video
HERE:
http://youtu.be/xVKhmV-v0jA
That should tell you everything you need to
know!