Blizzard Lighting Pipeline DMX Distributor (Rev A) - Manual (Page 2)

operating instructions:
• DMX Output: Connect to the DMX receiving device.
• DMX Input: From the DMX transmitting device.
Connector pin designation should be as follows:
Pin 1: Signal common (shield)
Pin 2: Dimmer drive complement (data 1-)
Pin 3: Dimmer drive true (data 1+)
Pin 4: Option second data link complement (not used)
Pin 5: Option second data link complement (not used)
Do not exceed 32 units per one output channel and use a terminator on the last receiver.
Caution:
• This item must be earthed (grounded).
• Do not apply power source before completely finishing the installation.
• Always disconnect from mains before replacing the fuse.
• To reduce risk of fire or electrical shock, do not expose to rain or moisture.
• Do not remove screws or covers. There are no user serviceable parts inside this unit.
Copyright (c) 2011 Blizzard Lighting, LLC
Enjoy your product!
Our sincerest thanks for your purchase!
--The team @ Blizzard Lighting