Blomberg GVN 9487 E - Manual (Page 29)

28 EN
1032
Upper impeller
Check if the holes on the upper
impeller (2) are clogged. If they
are clogged, remove and clean the
impeller. Turn its nut to left to remove
the upper impeller (C, D).
Make sure that the nut is tightened well
when installing the upper impeller.
�
�
�
�
�
�
Tavan_pervane_
redaksiyon
Ceiling impeller
Check if the holes on the top ceiling
impeller (3) of your machine are
clogged. If they are clogged, remove
and clean.
�
�
�
To remove the impeller, slightly
(E) push it upwards and then turn
clockwise (F).
To install the impeller, seat it into its
slot, push slightly upwards and turn it
anticlockwise until it is securely fitted.
When the impeller is released, check if
it rotates without any obstruction.