Blomberg GSN 9487 XSP - Manual (Page 32)

31 EN
close its lid.
•
Press On/Off button.
•
Check if the salt and rinse aid
warning indicators ( 9,10) light and
add salt and/or rinse aid if needed.
•
Determine your washing program
with the aid of the Program
Data and Table of Average
Consumption Values.
•
You can select the determined
washing program by pressing
program selection button ( 4).
•
You can see the program time in
the Remaining Time Indicator ( 11).
•
If necessary, you can change your
washing program as you prefer
by means of the Add Function
Buttons ( 5, 6).
•
Start the program by pressing the
Start / Pause / Cancel button ( 2).
WARNING:
Pay attention not to open the door
of the machine when it is running.
Stop the machine by pressing Start /
Pause / Cancel button ( 2) if you have
to open the door. Then, open the door
of your machine. There may be a rush
of vapor when you open the door of
your machine; be careful. Close the
door and press Start/Pause/Cancel
button ( 2) again. Program will resume
running.
•
End of Program indicator ( 15 c)
will light up.
•
Turn off your machine by pressing
On / Off button ( 1).
•
Close the tap.
•
Unplug the mains plug from the
wall socket.
•
Leave your dishes in the machine
for about 15 minutes after they
are washed in order to have them
cooled down. Your dishes will dry
in a shorter time if you leave the
door of your machine ajar during
this period. This will increase
the drying effectiveness of your
machine.