Boundless Technologies Ethernet Interface Adapter - Manual (Page 8)

4 Ethernet Interface Adapter User’s Guide
Check 05h
NVRAM and RAM problem
Check 0Dh
MAC, NVRAM and RAM problem
Check 06h
NVRAM and ROM problem
Check 0Eh
MAC, NVRAM and ROM problem
Check 07h
NVRAM, RAM and ROM
problem
Check 0Fh
MAC, NVRAM, ROM and RAM
Check 08h
MAC problem
Displaying the Ethernet Interface Main Menu
If the Poweron Connect mode is Off (see page 8) at the conclusion
of the startup diagnostics, you can press any key to enter the
setup menu.
Note that the Main Menu is accessible only when the
terminal is disconnected from the host.
If the Poweron Connect mode is On, the card will automatically try
to connect to the host.
- MAIN MENU -
Status > Disconnected from Host
Host IP Address > XXX.XXX.XXX.XXX
1. Setup Menu
2. Connect to Host
3. Ping
4. Hardware Information
--------------------------
9. Exit Main Menu
As shown in the illustration above, the Main Menu provides
the following functions:
◊
Selection 1 (Setup Menu) allows you to configure the
Ethernet interface.