Blomberg GEN 12400 X - Manual (Page 12)

12 | EN
2. In order to avoid the foreign substances
and liquids penetrating between the
hob and the worktop, please apply the
putty supplied in the package to the
contour of the housing in the worktop
before installation but make sure that
the putty does not overlap.
3. You can secure your hob to the
worktop by using the clamp and the
screws supplied.
* min. 20 & max. 40 mm
1 Hob
2 Screw
3 Fixing clamp
4 Worktop
5 Leakage seal
4. Place the burner plates, burner plate
caps and pan supports to their
respective positions after installation.
Bottom view (clamp holes)
Secure the hob.
Important
Clamping to different holes is not a
good practice in terms of safety
since it can damage the gas and
electrical system.
Final check
1. Open gas supply.
2. Check gas installations for secure fitting
and tightness.
3. Ignite burners and check appearance of
the flame.
Important
The flames should be blue and
burn smoothly. If the flames
appear yellowish, check secure
position of the burner cap or clean
the burner. Switch off gas and let
burner cool before touching it.