Blaupunkt Alicante CD31 - Manual (Page 13)

35
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
POR
TUGUÊS
Setting the scantime
➮
Press the MENU button
:
.
➮
Keep pressing the or button
9
until “SCANTIME” appears in
the display.
➮
Set the required scantime using
the and buttons
9
.
When you have finished making your
changes,
➮
press the MENU button
:
twice.
Note:
●
The set scantime also applies to
scanning in CD and CD changer
mode.
Programme type (PTY)
Besides transmitting the station name,
some FM stations also provide informa-
tion on the type of programme that they
are broadcasting.
For example, the programme types can
be:
CULTURE TRAVEL JAZZ
SPORT NEWS POP
ROCK MUSIC
Using the PTY function, you can direct-
ly select stations of a particular pro-
gramme type.
PTY-EON
If you specify the programme type and
start seek tuning, the radio will switch
from the current station to a station of
the selected programme type.
Note:
●
If no station is found that corre-
sponds to the selected programme
type, you will hear a beep and “NO
PTY” appears briefly in the display.
The station that was listened to last
will then be tuned into again.
●
If the tuned radio station or another
station on the broadcasting net-
work broadcasts the required pro-
gramme type at a later point in
time, the radio automatically
switches from the currently tuned
station or from CD mode / CD
changer mode to the station whose
programme type matches the one
you selected.
Switching PTY on/off
➮
Keep the TRAF (PTY) button
<
pressed until “PTY” appears in or
disappears from the display.
The programme type appears briefly in
the display when you switch PTY on.
Selecting a programme type and
starting seek tuning
➮
Press the or button
9
.
The current programme type appears
in the display.
➮
If you want to select another pro-
gramme type, you can do so by
pressing the or button
9
whilst in this display.
Or
➮
Press one of the buttons 1 - 5
;
to
select a programme type that is
stored on one of these buttons.
RADIO MODE