Channel viewer – BLUESHAPE BSCVMon v2.0 User Manual
Page 10
Battery model
Battery serial number
Battery full capacity
Actual state of charge
Charge time to full (not available during the first instant of charge)
Actual charging current
Actual battery voltage
Actual individual cell voltage
Cells temperature
Cycle counter (number of charge/discharge cycles already elapsed)
All this information is available for Blueshape® and compatible batteries
For batteries not communicating with the Blueshape® protocol, only minimal information is available during charge like
current and voltage, and the state of charge is approximated based on the charge voltage.
At any time, the
can be accessed through the related button at the top of the grid.
One channel viewer can be launched concurrently for any battery.
The Aux Port status is also displayed as soon as a load is connected. Channels are paused and the port is powered.
In a future release, an oscilloscope simulation feature will be available, to graphically monitor the output
Charger identification information is also displayed, including a charger picture
Channel Viewer
The Channel Viewer is launched from the
It provides a graphical representation in real time of the charger performance for the selected battery.
Two types of charts are available:
Created with the Standard Edition of HelpNDoc: