Bonide Revenge Horse & Stable Fly Spray RTU - Manual (Page 6)

TO CONTROL FIRE ANTS: Apply 1 gallon as a gentle rain to each fire ant
mound using a sprinkler can or other applicator. Thoroughly wet the mound and
surrounding area to a 4 foot diameter. For best results, apply in cool weather,
65-80 degrees F, or in early morning or late evening hours. Treat new mounds
as they appear. Do not disturb the mound prior to treatment. If possible, treat
all mounds in the vicinity, and treat all colonies which may not as yet have
constructed a mound. Do not use equipment that produces a pressurized spray
as pressurized sprays may disturb fire ants and cause migration, reducing
product effectiveness.
PESTS ON OUTSIDE SURFACES OF BUILDINGS: Use this product to control
ants, clover mites, crickets, earwigs, millipedes and sowbugs (pillbugs) on the
outside surfaces of buildings. To help prevent infestation of buildings, treat the
building foundation to a height of 3 feet where pests are and may find entrance.
Also, apply as a spot treatment to outside surfaces of buildings, including
porches, screens, window frames, eaves, patios, garages, refuse dumps and
other areas where these pests congregate or have been seen. Repeat treatment
as needed to maintain effectiveness.
HOUSE FLIES, MOSQUITOES, CLUSTER FLIES, GNATS, FLYING MOTHS
OUTDOORS: For outdoor use only as an aid in reducing annoyance from these
insects. Spray outside surfaces of screens, doors, window frames or wherever
these insects may enter the room. Also treat surfaces around light fixtures on
porches, in garages and other places where these insects alight or congregate.
Repeat as necessary.
ANTS, LONE STAR TICKS, CRICKETS, FLEAS AND EARWIGS OUTDOORS:
For treatment of localized infestations of these insects in outdoor areas where
there are weeds or bushy non-crop areas, spray infested areas thoroughly.
For ants, thoroughly wet hills and runways. Repeat applications as infestations
warrant and as reinfestations occur.