Brother BCL-D60 - Manual (Page 15)

General Information
4
1
f
Press a or b to display
Register Handset
.
g
Press Register Handset.
h
Press Register.
You will hear one long beep when the
cordless handset is registered correctly.
Note
• If you hear three short beeps, the cordless
handset did not register. Repeat steps b
through h.
• If you want to install another cordless
handset, repeat steps a through h.
i
Press Stop/Exit on the control panel of
the machine (base unit).
Deregistering cordless
handsets
If you want to register a handset that has
already been registered, with another
machine (base unit), you should deregister it
first, and then register it with the other
machine (base unit). (See Registering
additional cordless handsets on page 3.) If
you are using more than one cordless
handset, deregistration will remove all
handsets registered with the machine (base
unit).
Note
Do not operate any other cordless
handsets until deregistration of the
cordless handset you are removing has
completed.
a
Press MENU on the touchscreen of the
machine (base unit).
b
Press a or b to display
Initial Setup
.
c
Press Initial Setup.
d
Press a or b to display
Register Handset
.
e
Press Register Handset.
f
Press Terminate.
Then, press Yes to confirm..
g
Press Stop/Exit.