Brew Express BE-110 INSTALLATION - Manual (Page 7)

4
HArDwArE/TOOLS
HARDWARE
BREW EXPRESS comes supplied with the following items to ensure a successful installation.
Check to be certain all items have been included with your brewer.
• (1) Brewer (with short water line attached to connect with incoming water line)
• (1) Rough-in-Box
• (1) Carafe and lid
• (2) Brew Baskets (1 basket style, 1 cone style)
• (1) Installation Guide
• (1) Operation Guide
• (1) Template (for cutting hole for Rough-in-Box)
• (1) Hardware Kit: (located in brew basket)
(6) Sheet rock screws for mounting rough-in-box.
(3) Wire nuts
(1) Male Quick Connector (for connection between Coffee System Unit and Rough-in-Box)
TOOLS REQUIRED
The following tools are required for installation:
• Tape Measure
• Utility Knife
• Phillips Screw Driver
• Pencil
• Wire Stripper
• Stud Finder
• Pliers
• Level
PARTS REQUIRED (not supplied)
• Strain relief (Romex wire clamp)
• 12 - 2 wire (per local code)
• 1/4” Poly or copper line (refrigerator ice maker kit)
continuous length recommended.
• Caulking Gun
• Silicone Caulk
• Safety Glasses
• AC Power Sensor
• Crescent Wrench
• Reciprocating Saw (optional)
• Tile Cutting Bit (optional)
• Electric drill and drill bits
• Water filter
• Wire Nuts
• Valve Connection (optional)