Brinno GWC - Manual (Page 7)

Loading your Time and Date Stamp and
Custom Time Interval Setting onto your
USB Flash Drive :
1. Insert your USB Flash Drive into any available
USB port on your computer. Windows will
automatically assign a drive letter to the USB
flash drive. Make a note of the drive letter
assigned to the USB flash drive.
2. Start the “GardenWatchCam Setup” program
by double clicking the “GardenWatchCam
Setup” icon in the “GardenWatchCam”
program group. If the program group is not
open, you can open it by using the “Start..
Programs.. Brinno..” menus to find the
program group.
3. The “GardenWatchCam Setup” program has a
number of fields that can be modified. There
are two fields that allow the time and date to
be set, and there are three fields that allow the
Custom time interval to be set.
A sixth field is used to tell the program which
drive is to be used to store the file with the
time and date and custom time interval
data.Make sure the drive letter in this field
matches the drive letter in step 1. Once all the
fields have been set, hit the OK button to save
the file.
4. Remove the USB flash drive from your
computer’s USB port. Make sure your
GardenWatchCam is turned off, and then
insert the USB flash drive into your
GardenWatchCam in between the 4 AA
batteries on each side.
‧ 10 11 ‧
5. Turn on the GardenWatchCam. When the
GardenWatchCam detects the time and date
file on the USB flash drive it will automatically
load the data from the file, beep three times,
then turn off. The next time you turn on the
GardenWatchCam it will be set to the time
and date that were in the file. The Garden-
WatchCam will also remember the Custom
interval setting that was in the file.
Once you have set up your GardenWatch-
Cam you are READY to begin capturing all
the garden action in your backyard!
How to use “GardenWatchCam Setup”
B
A
A
D
E
B
C
C D
E
“GardenWatchCam Setup” allows you to set the time and date of the GardenWatchCam to your local
time. This program also allows you to set the time interval for the Custom setting on the Garden-
WatchCam.
Fluorescent Lighting Frequency
Select the correct lighting frequency to
match your indoor lighting frequency.
eg. USA: 50Hz, Europe: 60Hz
None: Turns the flicker filter off. This is the
normal way to operate a camera in an
outdoor environment.
Low Light Record
This option allows your GardenWatchCam
to work in low light environments.
USB Flash Drive
Select a drive letter assigned to your USB
flash drive.
Local Time and Date
Set the time and date to your local time.
Custom Time
You can set the custom time from 5 seconds
to 11 hours 59 minutes 59 seconds.